Testing My Blood With Accu Check It Reads 333 Whats That Mean

Your product may display an fault message for a number of reasons, for example if the battery is low. If you're experiencing an error message, the beneath images and descriptions should help you to identify the reason why it's showing.

Blank screen

If the meter won't plough on or has a blank brandish, it will be due to i of the following reasons:

Dead battery – you demand to insert a new one.
Damaged brandish – please contact Accu-Chek Customer Care.
Defective meter – delight contact Accu-Chek Customer Care.
Extreme temperatures – yous need to move the meter to a more temperate expanse.

Three dashes

If you encounter three dashes or hyphens on your display, information technology means the meter is not coded or the code key is not inserted. Turn off the meter and make sure the code cardinal is properly inserted. If this does not fix the trouble, delight contact Accu-Chek Customer Care.

Bombardment icon

The battery icon means the battery ability is low. Change the battery soon. Read this article to discover more about irresolute the battery.

"Prepare-up" on brandish

The words "Set-upwards" displayed on the screen means the meter is in the set-up style, waiting for you to change or ostend settings. Refer to Chapter five, "Using the Prepare-Up Mode", in your possessor's booklet.

"Set" on brandish

The discussion "Set" displayed on the screen means the meter is in prepare mode, waiting for you to alter or confirm settings. Refer to Chapter 4, "Meter Setup", in your owner's booklet.

"Lawmaking exp" on display

If you see "code exp" displayed on the screen, it means that the examination strips expire at the end of the current month. Make certain the time and date in the meter are correct. If this does not set up the problem, please contact Accu-Chek Client Care.

Flashing exam strip

If a test strip icon is flashing on the screen, information technology means that the meter is gear up for you to insert a test strip.

Blood driblet icon

If yous meet a blood driblet and test drib on the screen, it means that the meter is ready for a drop of blood or command solution.

HI in brandish

If you meet the messages HI displayed on the screen, your blood glucose may be higher than the measuring range of the system. Refer to Chapter 4, "Unusual Blood Glucose Results", in your possessor'south booklet.

LO in display

If you run into the letters LO displayed on the screen, your claret glucose may be lower than the measuring range of the system. Refer to Chapter 4, "Unusual Claret Glucose Results", in your owner's booklet.

Asterisk (top of screen) with claret glucose result

A star or asterisk on the top of the display means a marker was assigned to this test outcome.

Asterisk (bottom of screen) with blood glucose effect

A star or asterisk at the lesser of the display means that the test consequence was flagged. Refer to Chapter 3, "Flagging Test Results", in your owner's booklet for more details.

Exclamation point

An exclamation signal on the display means blood glucose is beneath the defined hypoglycemic (low blood sugar) level. Refer to Chapter four, "Unusual Blood Glucose Results", in your owner's booklet.

"Hypo?" on brandish

"Hypo?" means claret glucose is below the defined hypo (low blood saccharide) level. Refer to Chapter iii, "Agreement Your Test Results", in your owner'southward booklet.

Eastward-ane bulletin

"Due east-1" in the brandish ways the test strip may be damaged or the lawmaking fundamental is incorrect. Remove and reinsert the examination strip. If the message reappears, turn off the meter and make certain the lawmaking key is properly inserted. If the message reappears, delight contact Accu-Chek Client Care.

Eastward-2 message

"E-2" in the brandish means the code key is incorrect. Turn the meter off and make sure the code fundamental is properly inserted. If this does non ready the trouble, please contact Accu-Chek Client Care.

E-3 message

"E-3" in the display means your blood glucose may exist extremely high or a meter or a test strip error has occurred. The post-obit instructions should assistance you lot empathise what activeness to take:

If your test result matches how yous experience, contact your healthcare professional immediately.
If your test result does not friction match how you feel, repeat the exam and refer to Chapter 4, "Unusual Blood Glucose Results", in your possessor'south booklet.
If the E-three lawmaking still appears for your claret glucose test, your blood glucose result may be extremely loftier and higher up the system's reading range. Contact your healthcare professional person immediately.
If the 2d test event does not friction match how you experience, perform a command test with the control solution and a new test strip.
If the control result is within the acceptable range, review the proper testing process and repeat the blood glucose test with a new test strip.
If the control result is not within the adequate range, meet Chapter 2, "Understanding Out-of-Range Command Results."

Eastward-4 message

"E-4" in the display means not enough blood or control solution was fatigued into the test strip for measurement or was applied afterward the test has started. Discard the test strip and repeat the examination. If the trouble persists, delight contact Accu-Chek Client Care.

E-5 message

"E-five" in the brandish ways the code key is incorrect or your test strips have expired. Make certain the time and appointment in the meter are correct. If the problem persists, please contact Accu-Chek Customer Care.

East-6 message

"E-6" in the display means blood or control solution was applied to the exam strip before the flashing blood drib symbol appeared on the display. Discard the examination strip and echo the examination. If the trouble persists, please contact Accu-Chek Client Intendance.

E-7 bulletin

"E-7" in the brandish means an electronic fault occurred or, in rare cases, a used test strip was removed and reinserted. Turn the meter off and on or have the battery out for 20 seconds and reinsert information technology. Perform a blood glucose or control test. If the problem persists, please contact Accu-Chek Customer Care.

E-8 message

"Due east-eight" in the display means the temperature is above or below the proper range for the organization. Refer to the test strip packet insert for system operating conditions. Motility to an area with the appropriate weather condition, wait 5 minutes, and repeat the claret glucose or command exam. Do not artificially heat or absurd the meter.

E-9 bulletin

"E-9" in the display means the bombardment is almost out of power. Change the bombardment now. If the message reappears after the battery has been replaced, reset the meter. To reset the meter, remove the bombardment, press whatsoever meter push button, and then reinsert the battery. For further data, and refer to Chapter vii, "Changing the Battery", in your owner's booklet. Alternatively, this article gives detailed information about irresolute batteries in Accu-Chek products.

E-x message

"Due east-10" in the display means the time and date settings may be incorrect. Make sure the fourth dimension and date are correct and suit the settings if necessary. For further information, refer to Affiliate five, "Setting the Fourth dimension and Date", in your owner's booklet.

Err with bombardment icon

"Err" in the brandish with the bombardment icon means the battery is almost out of power, so alter the bombardment every bit soon as yous can. For more information, refer to Chapter 5, "Changing the Bombardment", in your possessor's booklet. Alternatively, this commodity gives detailed information most changing batteries in Accu-Chek products.

Err with time and date

"Err" in the display with the fourth dimension and engagement ways the fourth dimension and date settings may be incorrect. Make sure the time and date are correct and adjust, if necessary. For more data, refer to Affiliate 4, "Setting the Fourth dimension and Date", in your owner'due south booklet. Alternatively, this commodity gives detailed information virtually setting the time and engagement on your device.

Err with "lawmaking" on display

"Err" in the display with the word "lawmaking" means the code key is wrong. Make certain the code key is properly inserted. If this doesn't set up the problem, please contact Accu-Chek Customer Intendance.

Err with "code exp" on display

"Err" in the display with the words "lawmaking exp" means the lawmaking central is wrong or your test strips have expired. Make certain the code cardinal is properly inserted and check the date on your test strips. If this doesn't gear up the problem, please contact Accu-Chek Customer Care.

Err with flashing test strip

"Err" in the display with a flashing test strip ways your blood sugar may exist extremely low, or the test strip may exist damaged or not properly inserted. If you meet this error bulletin after you applied blood to the test strip, refer to Affiliate 3, "Unusual Exam Results", in your possessor'due south booklet. If you come across this error message earlier you applied blood to the exam strip, remove the test strip and reinsert information technology, or replace it if damaged. If the message reappears, delight contact Accu-Chek Customer Care.

Err with thermometer icon

"Err" in the brandish with a thermometer means the temperature is in a higher place or below the proper range for the meter (43°F to 111°F). Move to an area between 43°F and 111°F, look 5 minutes and repeat the test. Do not artificially rut or cool the meter.

Err with a test strip and blood drop icons

"Err" in the display with a test strip and a claret drop ways claret or control solution was practical to the test strip before the flashing blood drib appeared on the display. Discard the test strip and repeat the test.

Err with a blood drop icon

"Err" in the display with a blood driblet means not plenty sample was fatigued into the test strip for measurement or sample was applied after the test has started. Discard the test strip and repeat the examination.

Err alone in the display

"Err" with no other information in the display means an error occurred during the examination. Discard the test strip and repeat the exam. For more than information, refer to Chapter one, "Agreement Your New System", in your possessor'south booklet.

EEE in brandish

"EEE" in the display means an electronic error occurred. Turn the meter off and on or have the bombardment out for a few seconds and reinsert it. If the problem persists, please contact Accu-Chek Customer Care.

everittsnate1938.blogspot.com

Source: https://www.accu-chek.com/support/error-messages/what-does-error-message-my-accu-chek-product-mean